Magnification products are an essential element to the daily activities of many individuals today. Whether the application is for commercial, professional or personal use, a magnifier enhances one's ability to perform or enjoy a task or hobby.
Focal Length:
The distance from the center of the lens (or lens system) to the viewed object. Working distance is the distance from the bottomo of the lens, or the lens housing to the object when the object appears at maximum magnification without distortion. It is important to remember that as magnification increases, the focal length decreases.
Diopter (d):
A term used to identify the refractive (light bending) capacity of a lens. In magnifiers, there is a direct correlation between focallength and diopter. To find the diopter of a magnification lens, follow these steps: (1) With the eyes 10 inches above the lens, move the object to be viewed to the point the greatest distance below the lens where it remains in sharp focus, (2) Measure the distance and divide this distance into 1 meter (39.37 inches). The result is the diopter of the lens - 3.g. if the object is at a 13" distnace then it is a 3-diopter lens (39.37+13=3d. Each diopter increases the size of the viewed object by 1/4 (25%) when the object is at its full focal length from the lens.
Field of View:
The distance across teh lens surface to which the viewer brings both eyes (note: eyes should be 10" above the lens). It is important to note that as magnification increases, meaning the lenses used are stronger, viewing areas and focal length decrease.
Magnification:
The degree to which the viewed object is enlarged. Magnification is usually expressed by a number followed by an "x", the symbol used to express power or the size of the object in relationship to its acutal size. The formula for calculating magnifcation power is: (Diopter/4)+1=Magnification
Selecting the Right Magnifier:
1. Determine the desired magnifiction for your needs. Remember, as you increase magnifciation, you decrease both focal length and the view area.
2. Check to find out the correct dipter you need to achieve that magnification. The vast majority start with the standard 3-diopter factory-installed lens and add secondary lenses or change primary lenses as needed.
3. Note the focal length and lens diameter that correspond to the magnification and lens diopter you have chosen, and make sure they are suitable for your task.
4. Select the primary and secondary lens combination required to achieve the desired magnification.
5. As a general rule, because the working distance will be less than 8 inches, lenses or lens combinations above 5-diopter are recommended for inspection purposes only.